我正在尝试将nginx设置为Meteor应用程序前的代理服务器.这些将在Docker容器中运行.我想做的是将每个请求重定向为与Meteor服务器的SSL调用(在端口8080上).然而,当我这样做时,所有发生的事情是在浏览器中它返回并说
https://localhost并没有任何反应,Meteor应用程序不会显示.请注意,我创建了一个自签名SSL证书,其中服务器名称为“localhost”.但是,如果我删除SSL部分,那么重定向工作完美,并且调用/导致在端口8080上成功调用Meteor.那么,如何使SSL正常工作?自签名localhost证书是否存在问题?下面显示了有效的配置,以及不起作用的配置(使用SSL).谢谢 :)
这有效
server_tokens off; # for security-by-obscurity: stop displaying nginx version
# This section is needed to proxy web-socket connections
map $http_upgrade $connection_upgrade {
default upgrade;
'' close;
}
# HTTP
server {
# If this is not a default server, remove "default_server"
listen 80 default_server;
listen [::]:80 default_server ipv6only=on;
# These are irrelevant
root /usr/share/nginx/html;
index index.html index.htm;
# The domain on which we want to host the application. Since we set "default_server"
# previously, nginx will answer all hosts anyway.
server_name localhost;
# The redirection.
location / {
proxy_pass http://localhost:8080;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection ‘upgrade’;
proxy_set_header Host $host;
proxy_cache_bypass $http_upgrade;
}
}
这不起作用
server_tokens off; # for security-by-obscurity: stop displaying nginx version
# This section is needed to proxy web-socket connections
map $http_upgrade $connection_upgrade {
default upgrade;
'' close;
}
# HTTP
server {
# If this is not a default server, remove "default_server"
listen 80 default_server;
listen [::]:80 default_server ipv6only=on;
# These are irrelevant
root /usr/share/nginx/html;
index index.html index.htm;
# The domain on which we want to host the application. Since we set "default_server"
# previously, nginx will answer all hosts anyway.
server_name localhost;
# Redirect non-SSL to SSL
location / {
rewrite ^ https://$server_name$request_uri? permanent;
}
}
# HTTPS server
server {
# We enable SPDY here
listen 443 ssl spdy;
# This domain must match Common Name (CN) in the SSL certificate
server_name localhost;
# Irrelevant
root html;
index index.html;
# Full path to SSL certificate and CA certificate concatenated together
ssl_certificate /etc/nginx/ssl/server.crt;
# Full path to SSL key
ssl_certificate_key /etc/nginx/ssl/server.key;
# Performance enhancement for SSL
ssl_stapling on;
ssl_session_cache shared:SSL:10m;
ssl_session_timeout 5m;
# Safety enhancement to SSL: make sure we actually use a safe cipher
ssl_prefer_server_ciphers on;
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM- SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:RC4-SHA:HIGH:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK';
# Config to enable HSTS(HTTP Strict Transport Security) https://developer.mozilla.org/en-US/docs/Security/HTTP_Strict_Transport_Security
# To avoid ssl stripping https://en.wikipedia.org/wiki/SSL_stripping#SSL_stripping
add_header Strict-Transport-Security "max-age=31536000;";
# If your application is not compatible with IE <= 10, this will redirect visitors to a page advising a browser update
# This works because IE 11 does not present itself as MSIE anymore
if ($http_user_agent ~ "MSIE" ) {
return 303 https://browser-update.org/update.html;
}
# Pass all requests to Meteor
location / {
proxy_pass http://localhost:8080;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade; # allow websockets
proxy_set_header Connection $connection_upgrade;
proxy_set_header X-Forwarded-For $remote_addr; # preserve client IP
# This setting allows the browser to cache the application in a way compatible with Meteor
# on every application update the name of CSS and JS file is different, so they can be cache
# infinitely (here: 30 days). The root path (/) MUST NOT be cached
if ($uri != '/') {
expires 30d;
}
}
}
最佳答案 我无法让它在“localhost”上运行,但这里有一个有很多描述的工作生产版本可以帮助人们:
# This configuration provides strong SSL security on the nginx webserver. We do
# this by disabling SSL Compression to mitigate the CRIME attack, disable SSLv3
# and because of vulnerabilities in the protocol and we will set up a strong
# ciphersuite that enables Forward Secrecy when possible. We also enable HSTS and
# HPKP. This way we have a strong and future proof ssl configuration and we get
# an A on the Qually Labs SSL Test.
#
# This configuration passes all the requests to a Meteor server. In order for
# this to work you have to ensure that Meteor does NOT implement force-ssl.
# Enables or disables emitting nginx version in error messages and in the Server
# response header field.
server_tokens off;
# This turns a connection between a client and server from HTTP/1.1 into a WebSocket,
# the protocol switch mechanism available in HTTP/1.1 is used. In this implementation
# the Connection header field in a request to the proxied server depends on the
# presence of the Upgrade field in the client request header.
map $http_upgrade $connection_upgrade {
default upgrade;
'' close;
}
# Nginx upstream services. Nginx connects to nodejs on the IPv6 loopback [::1] and so
# you must specify the IP address here or nodejs will just listen on IPv4.
upstream meteor-server {
server 127.0.0.1:8080;
}
# HTTP. This is not the default server and will redirect all the calls
# to the https server.
server {
# Listen on port 80 for ipv4 traffic and on [::]:80 for ipv6 traffic
listen 80;
listen [::]:80 ipv6only=on;
# File paths - these are ignored. The path is specific for nginx on Ubuntu.
root /usr/share/nginx/html/;
index index.html index.htm;
# The domain on which we want to host the application.
server_name <your server>;
# Redirect non-SSL to SSL
location / {
rewrite ^ https://$server_name$request_uri? permanent;
}
}
# HTTPS. This is the default server.
server {
# Listen on port 443 for ipv4 traffic and on [::]:443 for ipv6 traffic.
# This is the default server
listen 443 ssl spdy;
listen [::]:443 ssl spdy ipv6only=on;
# File paths - these are ignored. The path is specific for nginx on Ubuntu.
root /usr/share/nginx/html/;
index index.html index.htm;
# The domain on which we want to host the application.
server_name <your server>;
# Full path to SSL Certificate and CA Certificate concatenated together
ssl_certificate /etc/nginx/ssl/server.crt;
# Full path to SSL Key
ssl_certificate_key /etc/nginx/ssl/server.key;
# When choosing a cipher during an SSLv3 or TLSv1 handshake, normally the
# client's preference is used. If this directive is enabled, the server's
# preference will be used instead.
ssl_prefer_server_ciphers on;
ssl_session_cache shared:SSL:10m;
# The ciphers
ssl_ciphers 'AES128+EECDH:AES128+EDH:!aNULL';
# This is for backwards compatibility with IE6/WinXP
#ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:RC4-SHA:HIGH:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK';
# SSL Protocols
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
# Online Certificate Status Protocol (OCSP) stapling
ssl_stapling on;
ssl_stapling_verify on;
# Enforce the use of the Google DNS servers to resolve addresses
resolver 8.8.4.4 8.8.8.8 valid=300s;
resolver_timeout 10s;
# Forward Secrecy & Diffie Hellman Ephemeral Parameters
ssl_dhparam /etc/ssl/certs/dhparam.pem;
# HTTP Strict-Transport-Security (HSTS) enforces secure (HTTP over SSL/TLS)
# connections to the server. This reduces impact of bugs in web applications
# leaking session data through cookies and external links and defends against
# Man-in-the-middle attacks. HSTS also disables the ability for user's to ignore
# SSL negotiation warnings (ssl stripping). See: https://developer.mozilla.org/en-US/docs/Security/
# and https://en.wikipedia.org/wiki/SSL_stripping#SSL_stripping
add_header Strict-Transport-Security max-age=63072000;
# Provides for Clickjacking protection by denying the ability of the browser to
# render a page in a <frame>, <iframe> or <object>.
add_header X-Frame-Options DENY;
# This prevents Internet Explorer and Google Chrome from MIME-sniffing a response
# away from the declared content-type.
add_header X-Content-Type-Options nosniff;
# This header enables the Cross-site scripting (XSS) filter built into most
# recent web browsers. It's usually enabled by default anyway.
add_header X-XSS-Protection 1;
# If your application is not compatible with IE <= 10, this will redirect visitors to
# a page advising a browser update. This works because IE 11 does not present itself as
# MSIE anymore
if ($http_user_agent ~ "MSIE" ) {
return 303 https://browser-update.org/update.html;
}
# Handle the root route. This will pass everything onto the Meteor
# server.
location / {
# Pass upstream
proxy_pass http://meteor-server;
# Socket.IO Support (WebSockets)
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection $http_upgrade;
# This ensure that the Host header that the client sent nginx is
# sent on to the backend
proxy_set_header Host $host;
# Defines conditions under which the response will not be taken from a cache.
proxy_cache_bypass $http_upgrade;
# This provides the real client IP rather than the one from the nginx proxy system.
# This is very useful for logging etc.
proxy_set_header X-Real-IP $remote_addr;
# This is similar to X-Real-IP, but provides added connection source entries
# for the entire chain of proxies the connection's passed through.
proxy_set_header X-Forwarded-For $remote_addr;
# A de facto standard for identifying the originating protocol of an HTTP request,
# since a reverse proxy may communicate with a web server using HTTP even if the
# request to the reverse proxy is HTTPS.
proxy_set_header X-Forwarded-Proto $scheme;
# This simply acts as as a marker that the proxy is used. It not really needed.
proxy_set_header X-NginX-Proxy true;
# Sets the text that should be changed in the Location and Refresh header
# fields of a proxied server response.
proxy_redirect off;
# This setting allows the browser to cache the application in a way compatible with Meteor
# on every application update the name of CSS and JS file is different, so they can be cache
# infinitely (here: 30 days). The root path (/) MUST NOT be cached
if ($uri != '/') {
expires 30d;
}
}
}