9.5的常用的一些设置，自己mark一下防止丢失;参数用途的说明，不做说明，仅为自己记录
<pre>
max_connections = 3000
work_mem = 8MB
shared_buffers = 1GB
fsync = off
synchronous_commit = off
commit_delay = 500
commit_siblings = 25
checkpoint_completion_target = 0.9
autovacuum = on
bgwriter_delay=10ms
full_page_writes=off
wal_writer_delay=10ms
max_wal_size=32GB
hot_standby=on

wal_receiver_status_interval=1s

hot_standby_feedback=on

random_page_cost=1.0

maintenance_work_mem=64MB
autovacuum_work_mem=64MB
archive_mode=off

enable_nestloop=off

</pre>
9.6的并行查询参数,黑体标明，
官方说明：
<pre>
<b>Parallel query execution is not (yet) enabled by default. To allow it, set the new configuration parameter max_parallel_workers_per_gather to a value larger than zero. Additional control over use of parallelism is available through other new configuration parametersforce_parallel_mode, parallel_setup_cost, parallel_tuple_cost, and min_parallel_relation_size.
</b>
</pre>
<pre>
[root@gp-node6 queries]# psql
Password:
psql.bin (9.6.0)
Type “help” for help.

postgres=# show all;
name | setting | description
————————————-+————————————————————————————-+——————————————————————————————————————————-
allow_system_table_mods | off | Allows modifications of the structure of system tables.
application_name | psql.bin | Sets the application name to be reported in statistics and logs.
archive_command | (disabled) | Sets the shell command that will be called to archive a WAL file.
archive_mode | off | Allows archiving of WAL files using archive_command.
archive_timeout | 0 | Forces a switch to the next xlog file if a new file has not been started within N seconds.
array_nulls | on | Enable input of NULL elements in arrays.
authentication_timeout | 1min | Sets the maximum allowed time to complete client authentication.
autovacuum | on | Starts the autovacuum subprocess.
autovacuum_analyze_scale_factor | 0.1 | Number of tuple inserts, updates, or deletes prior to analyze as a fraction of reltuples.
autovacuum_analyze_threshold | 50 | Minimum number of tuple inserts, updates, or deletes prior to analyze.
autovacuum_freeze_max_age | 200000000 | Age at which to autovacuum a table to prevent transaction ID wraparound.
autovacuum_max_workers | 3 | Sets the maximum number of simultaneously running autovacuum worker processes.
autovacuum_multixact_freeze_max_age | 400000000 | Multixact age at which to autovacuum a table to prevent multixact wraparound.
autovacuum_naptime | 1min | Time to sleep between autovacuum runs.
autovacuum_vacuum_cost_delay | 20ms | Vacuum cost delay in milliseconds, for autovacuum.
autovacuum_vacuum_cost_limit | -1 | Vacuum cost amount available before napping, for autovacuum.
autovacuum_vacuum_scale_factor | 0.2 | Number of tuple updates or deletes prior to vacuum as a fraction of reltuples.
autovacuum_vacuum_threshold | 50 | Minimum number of tuple updates or deletes prior to vacuum.
autovacuum_work_mem | 256MB | Sets the maximum memory to be used by each autovacuum worker process.
backend_flush_after | 0 | Number of pages after which previously performed writes are flushed to disk.
backslash_quote | safe_encoding | Sets whether “‘” is allowed in string literals.
bgwriter_delay | 200ms | Background writer sleep time between rounds.
bgwriter_flush_after | 512kB | Number of pages after which previously performed writes are flushed to disk.
bgwriter_lru_maxpages | 100 | Background writer maximum number of LRU pages to flush per round.
bgwriter_lru_multiplier | 2 | Multiple of the average buffer usage to free per round.
block_size | 8192 | Shows the size of a disk block.
bonjour | off | Enables advertising the server via Bonjour.
bonjour_name | | Sets the Bonjour service name.
bytea_output | hex | Sets the output format for bytea.
check_function_bodies | on | Check function bodies during CREATE FUNCTION.
checkpoint_completion_target | 0.5 | Time spent flushing dirty buffers during checkpoint, as fraction of checkpoint interval.
checkpoint_flush_after | 256kB | Number of pages after which previously performed writes are flushed to disk.
checkpoint_timeout | 5min | Sets the maximum time between automatic WAL checkpoints.
checkpoint_warning | 30s | Enables warnings if checkpoint segments are filled more frequently than this.
client_encoding | UTF8 | Sets the client’s character set encoding.
client_min_messages | notice | Sets the message levels that are sent to the client.
cluster_name | | Sets the name of the cluster, which is included in the process title.
commit_delay | 0 | Sets the delay in microseconds between transaction commit and flushing WAL to disk.
commit_siblings | 5 | Sets the minimum concurrent open transactions before performing commit_delay.
config_file | /opt/PostgreSQL/9.6/data/postgresql.conf | Sets the server’s main configuration file.
constraint_exclusion | partition | Enables the planner to use constraints to optimize queries.
cpu_index_tuple_cost | 0.005 | Sets the planner’s estimate of the cost of processing each index entry during an index scan.
cpu_operator_cost | 0.0025 | Sets the planner’s estimate of the cost of processing each operator or function call.
cpu_tuple_cost | 0.01 | Sets the planner’s estimate of the cost of processing each tuple (row).
cursor_tuple_fraction | 0.1 | Sets the planner’s estimate of the fraction of a cursor’s rows that will be retrieved.
data_checksums | off | Shows whether data checksums are turned on for this cluster.
data_directory | /opt/PostgreSQL/9.6/data | Sets the server’s data directory.
DateStyle | ISO, YMD | Sets the display format for date and time values.
db_user_namespace | off | Enables per-database user names.
deadlock_timeout | 1s | Sets the time to wait on a lock before checking for deadlock.
debug_assertions | off | Shows whether the running server has assertion checks enabled.
debug_pretty_print | on | Indents parse and plan tree displays.
debug_print_parse | off | Logs each query’s parse tree.
debug_print_plan | off | Logs each query’s execution plan.
debug_print_rewritten | off | Logs each query’s rewritten parse tree.
default_statistics_target | 100 | Sets the default statistics target.
default_tablespace | | Sets the default tablespace to create tables and indexes in.
default_text_search_config | pg_catalog.simple | Sets default text search configuration.
default_transaction_deferrable | off | Sets the default deferrable status of new transactions.
default_transaction_isolation | read committed | Sets the transaction isolation level of each new transaction.
default_transaction_read_only | off | Sets the default read-only status of new transactions.
default_with_oids | off | Create new tables with OIDs by default.
dynamic_library_path | $libdir | Sets the path for dynamically loadable modules.
dynamic_shared_memory_type | posix | Selects the dynamic shared memory implementation used.
effective_cache_size | 4GB | Sets the planner’s assumption about the size of the disk cache.
effective_io_concurrency | 1 | Number of simultaneous requests that can be handled efficiently by the disk subsystem.
enable_bitmapscan | on | Enables the planner’s use of bitmap-scan plans.
enable_hashagg | on | Enables the planner’s use of hashed aggregation plans.
enable_hashjoin | on | Enables the planner’s use of hash join plans.
enable_indexonlyscan | on | Enables the planner’s use of index-only-scan plans.
enable_indexscan | on | Enables the planner’s use of index-scan plans.
enable_material | on | Enables the planner’s use of materialization.
enable_mergejoin | on | Enables the planner’s use of merge join plans.
enable_nestloop | on | Enables the planner’s use of nested-loop join plans.
enable_seqscan | on | Enables the planner’s use of sequential-scan plans.
enable_sort | on | Enables the planner’s use of explicit sort steps.
enable_tidscan | on | Enables the planner’s use of TID scan plans.
escape_string_warning | on | Warn about backslash escapes in ordinary string literals.
event_source | PostgreSQL | Sets the application name used to identify PostgreSQL messages in the event log.
exit_on_error | off | Terminate session on any error.
external_pid_file | | Writes the postmaster PID to the specified file.
extra_float_digits | 0 | Sets the number of digits displayed for floating-point values.
force_parallel_mode | off | Forces use of parallel query facilities.
from_collapse_limit | 8 | Sets the FROM-list size beyond which subqueries are not collapsed.
fsync | on | Forces synchronization of updates to disk.
full_page_writes | on | Writes full pages to WAL when first modified after a checkpoint.
geqo | on | Enables genetic query optimization.
geqo_effort | 5 | GEQO: effort is used to set the default for other GEQO parameters.
geqo_generations | 0 | GEQO: number of iterations of the algorithm.
geqo_pool_size | 0 | GEQO: number of individuals in the population.
geqo_seed | 0 | GEQO: seed for random path selection.
geqo_selection_bias | 2 | GEQO: selective pressure within the population.
geqo_threshold | 12 | Sets the threshold of FROM items beyond which GEQO is used.
gin_fuzzy_search_limit | 0 | Sets the maximum allowed result for exact search by GIN.
gin_pending_list_limit | 4MB | Sets the maximum size of the pending list for GIN index.
hba_file | /opt/PostgreSQL/9.6/data/pg_hba.conf | Sets the server’s “hba” configuration file.
hot_standby | off | Allows connections and queries during recovery.
hot_standby_feedback | off | Allows feedback from a hot standby to the primary that will avoid query conflicts.
huge_pages | try | Use of huge pages on Linux.
ident_file | /opt/PostgreSQL/9.6/data/pg_ident.conf | Sets the server’s “ident” configuration file.
idle_in_transaction_session_timeout | 0 | Sets the maximum allowed duration of any idling transaction.
ignore_checksum_failure | off | Continues processing after a checksum failure.
ignore_system_indexes | off | Disables reading from system indexes.
integer_datetimes | on | Datetimes are integer based.
IntervalStyle | postgres | Sets the display format for interval values.
join_collapse_limit | 8 | Sets the FROM-list size beyond which JOIN constructs are not flattened.
krb_caseins_users | off | Sets whether Kerberos and GSSAPI user names should be treated as case-insensitive.
krb_server_keyfile | FILE:/mnt/hgfs/pginstaller.pune/server/staging/linux-x64/etc/postgresql/krb5.keytab | Sets the location of the Kerberos server key file.
lc_collate | zh_CN.UTF-8 | Shows the collation order locale.
lc_ctype | zh_CN.UTF-8 | Shows the character classification and case conversion locale.
lc_messages | zh_CN.UTF-8 | Sets the language in which messages are displayed.
lc_monetary | zh_CN.UTF-8 | Sets the locale for formatting monetary amounts.
lc_numeric | zh_CN.UTF-8 | Sets the locale for formatting numbers.
lc_time | zh_CN.UTF-8 | Sets the locale for formatting date and time values.
listen_addresses | * | Sets the host name or IP address(es) to listen to.
lo_compat_privileges | off | Enables backward compatibility mode for privilege checks on large objects.
local_preload_libraries | | Lists unprivileged shared libraries to preload into each backend.
lock_timeout | 0 | Sets the maximum allowed duration of any wait for a lock.
log_autovacuum_min_duration | -1 | Sets the minimum execution time above which autovacuum actions will be logged.
log_checkpoints | off | Logs each checkpoint.
log_connections | off | Logs each successful connection.
log_destination | stderr | Sets the destination for server log output.
log_directory | pg_log | Sets the destination directory for log files.
log_disconnections | off | Logs end of a session, including duration.
log_duration | off | Logs the duration of each completed SQL statement.
log_error_verbosity | default | Sets the verbosity of logged messages.
log_executor_stats | off | Writes executor performance statistics to the server log.
log_file_mode | 0600 | Sets the file permissions for log files.
log_filename | postgresql-%Y-%m-%d_%H%M%S.log | Sets the file name pattern for log files.
log_hostname | off | Logs the host name in the connection logs.
log_line_prefix | %t | Controls information prefixed to each log line.
log_lock_waits | off | Logs long lock waits.
log_min_duration_statement | -1 | Sets the minimum execution time above which statements will be logged.
log_min_error_statement | error | Causes all statements generating error at or above this level to be logged.
log_min_messages | warning | Sets the message levels that are logged.
log_parser_stats | off | Writes parser performance statistics to the server log.
log_planner_stats | off | Writes planner performance statistics to the server log.
log_replication_commands | off | Logs each replication command.
log_rotation_age | 1d | Automatic log file rotation will occur after N minutes.
log_rotation_size | 10MB | Automatic log file rotation will occur after N kilobytes.
log_statement | none | Sets the type of statements logged.
log_statement_stats | off | Writes cumulative performance statistics to the server log.
log_temp_files | -1 | Log the use of temporary files larger than this number of kilobytes.
log_timezone | PRC | Sets the time zone to use in log messages.
log_truncate_on_rotation | off | Truncate existing log files of same name during log rotation.
logging_collector | on | Start a subprocess to capture stderr output and/or csvlogs into log files.
maintenance_work_mem | 512MB | Sets the maximum memory to be used for maintenance operations.
max_connections | 100 | Sets the maximum number of concurrent connections.
max_files_per_process | 1000 | Sets the maximum number of simultaneously open files for each server process.
max_function_args | 100 | Shows the maximum number of function arguments.
max_identifier_length | 63 | Shows the maximum identifier length.
max_index_keys | 32 | Shows the maximum number of index keys.
max_locks_per_transaction | 64 | Sets the maximum number of locks per transaction.
<b> max_parallel_workers_per_gather | 8 | Sets the maximum number of parallel processes per executor node.</b>
max_pred_locks_per_transaction | 64 | Sets the maximum number of predicate locks per transaction.
max_prepared_transactions | 0 | Sets the maximum number of simultaneously prepared transactions.
max_replication_slots | 0 | Sets the maximum number of simultaneously defined replication slots.
max_stack_depth | 2MB | Sets the maximum stack depth, in kilobytes.
max_standby_archive_delay | 30s | Sets the maximum delay before canceling queries when a hot standby server is processing archived WAL data.
max_standby_streaming_delay | 30s | Sets the maximum delay before canceling queries when a hot standby server is processing streamed WAL data.
max_wal_senders | 0 | Sets the maximum number of simultaneously running WAL sender processes.
max_wal_size | 1GB | Sets the WAL size that triggers a checkpoint.
<b> max_worker_processes | 8 | Maximum number of concurrent worker processes.</b>
min_parallel_relation_size | 8MB | Sets the minimum size of relations to be considered for parallel scan.
min_wal_size | 80MB | Sets the minimum size to shrink the WAL to.
old_snapshot_threshold | -1 | Time before a snapshot is too old to read pages changed after the snapshot was taken.
operator_precedence_warning | off | Emit a warning for constructs that changed meaning since PostgreSQL 9.4.
parallel_setup_cost | 1000 | Sets the planner’s estimate of the cost of starting up worker processes for parallel query.
parallel_tuple_cost | 0.1 | Sets the planner’s estimate of the cost of passing each tuple (row) from worker to master backend.
password_encryption | on | Encrypt passwords.
port | 5432 | Sets the TCP port the server listens on.
post_auth_delay | 0 | Waits N seconds on connection startup after authentication.
pre_auth_delay | 0 | Waits N seconds on connection startup before authentication.
quote_all_identifiers | off | When generating SQL fragments, quote all identifiers.
random_page_cost | 4 | Sets the planner’s estimate of the cost of a nonsequentially fetched disk page.
replacement_sort_tuples | 150000 | Sets the maximum number of tuples to be sorted using replacement selection.
restart_after_crash | on | Reinitialize server after backend crash.
row_security | on | Enable row security.
search_path | “$user”, public | Sets the schema search order for names that are not schema-qualified.
segment_size | 1GB | Shows the number of pages per disk file.
seq_page_cost | 1 | Sets the planner’s estimate of the cost of a sequentially fetched disk page.
server_encoding | UTF8 | Sets the server (database) character set encoding.
server_version | 9.6.0 | Shows the server version.
server_version_num | 90600 | Shows the server version as an integer.
session_preload_libraries | | Lists shared libraries to preload into each backend.
session_replication_role | origin | Sets the session’s behavior for triggers and rewrite rules.
shared_buffers | 16GB | Sets the number of shared memory buffers used by the server.
shared_preload_libraries | | Lists shared libraries to preload into server.
sql_inheritance | on | Causes subtables to be included by default in various commands.
ssl | off | Enables SSL connections.
ssl_ca_file | | Location of the SSL certificate authority file.
ssl_cert_file | server.crt | Location of the SSL server certificate file.
ssl_ciphers | HIGH:MEDIUM:+3DES:!aNULL | Sets the list of allowed SSL ciphers.
ssl_crl_file | | Location of the SSL certificate revocation list file.
ssl_ecdh_curve | prime256v1 | Sets the curve to use for ECDH.
ssl_key_file | server.key | Location of the SSL server private key file.
ssl_prefer_server_ciphers | on | Give priority to server ciphersuite order.
standard_conforming_strings | on | Causes ‘…’ strings to treat backslashes literally.
statement_timeout | 0 | Sets the maximum allowed duration of any statement.
stats_temp_directory | pg_stat_tmp | Writes temporary statistics files to the specified directory.
superuser_reserved_connections | 3 | Sets the number of connection slots reserved for superusers.
synchronize_seqscans | on | Enable synchronized sequential scans.
synchronous_commit | on | Sets the current transaction’s synchronization level.
synchronous_standby_names | | Number of synchronous standbys and list of names of potential synchronous ones.
syslog_facility | local0 | Sets the syslog “facility” to be used when syslog enabled.
syslog_ident | postgres | Sets the program name used to identify PostgreSQL messages in syslog.
syslog_sequence_numbers | on | Add sequence number to syslog messages to avoid duplicate suppression.
syslog_split_messages | on | Split messages sent to syslog by lines and to fit into 1024 bytes.
tcp_keepalives_count | 0 | Maximum number of TCP keepalive retransmits.
tcp_keepalives_idle | 0 | Time between issuing TCP keepalives.
tcp_keepalives_interval | 0 | Time between TCP keepalive retransmits.
temp_buffers | 8MB | Sets the maximum number of temporary buffers used by each session.
temp_file_limit | -1 | Limits the total size of all temporary files used by each process.
temp_tablespaces | | Sets the tablespace(s) to use for temporary tables and sort files.
TimeZone | PRC | Sets the time zone for displaying and interpreting time stamps.
timezone_abbreviations | Default | Selects a file of time zone abbreviations.
trace_notify | off | Generates debugging output for LISTEN and NOTIFY.
trace_recovery_messages | log | Enables logging of recovery-related debugging information.
trace_sort | off | Emit information about resource usage in sorting.
track_activities | on | Collects information about executing commands.
track_activity_query_size | 1024 | Sets the size reserved for pg_stat_activity.query, in bytes.
track_commit_timestamp | off | Collects transaction commit time.
track_counts | on | Collects statistics on database activity.
track_functions | none | Collects function-level statistics on database activity.
track_io_timing | off | Collects timing statistics for database I/O activity.
transaction_deferrable | off | Whether to defer a read-only serializable transaction until it can be executed with no possible serialization failures.
transaction_isolation | read committed | Sets the current transaction’s isolation level.
transaction_read_only | off | Sets the current transaction’s read-only status.
transform_null_equals | off | Treats “expr=NULL” as “expr IS NULL”.
unix_socket_directories | /tmp | Sets the directories where Unix-domain sockets will be created.
unix_socket_group | | Sets the owning group of the Unix-domain socket.
unix_socket_permissions | 0777 | Sets the access permissions of the Unix-domain socket.
update_process_title | on | Updates the process title to show the active SQL command.
vacuum_cost_delay | 0 | Vacuum cost delay in milliseconds.
vacuum_cost_limit | 200 | Vacuum cost amount available before napping.
vacuum_cost_page_dirty | 20 | Vacuum cost for a page dirtied by vacuum.
vacuum_cost_page_hit | 1 | Vacuum cost for a page found in the buffer cache.
vacuum_cost_page_miss | 10 | Vacuum cost for a page not found in the buffer cache.
vacuum_defer_cleanup_age | 0 | Number of transactions by which VACUUM and HOT cleanup should be deferred, if any.
vacuum_freeze_min_age | 50000000 | Minimum age at which VACUUM should freeze a table row.
vacuum_freeze_table_age | 150000000 | Age at which VACUUM should scan whole table to freeze tuples.
vacuum_multixact_freeze_min_age | 5000000 | Minimum age at which VACUUM should freeze a MultiXactId in a table row.
vacuum_multixact_freeze_table_age | 150000000 | Multixact age at which VACUUM should scan whole table to freeze tuples.
wal_block_size | 8192 | Shows the block size in the write ahead log.
wal_buffers | 16MB | Sets the number of disk-page buffers in shared memory for WAL.
wal_compression | off | Compresses full-page writes written in WAL file.
wal_keep_segments | 0 | Sets the number of WAL files held for standby servers.
wal_level | minimal | Set the level of information written to the WAL.
wal_log_hints | off | Writes full pages to WAL when first modified after a checkpoint, even for a non-critical modifications.
wal_receiver_status_interval | 10s | Sets the maximum interval between WAL receiver status reports to the primary.
wal_receiver_timeout | 1min | Sets the maximum wait time to receive data from the primary.
wal_retrieve_retry_interval | 5s | Sets the time to wait before retrying to retrieve WAL after a failed attempt.
wal_segment_size | 16MB | Shows the number of pages per write ahead log segment.
wal_sender_timeout | 1min | Sets the maximum time to wait for WAL replication.
wal_sync_method | fdatasync | Selects the method used for forcing WAL updates to disk.
wal_writer_delay | 200ms | Time between WAL flushes performed in the WAL writer.
wal_writer_flush_after | 1MB | Amount of WAL written out by WAL writer triggering a flush.
work_mem | 32MB | Sets the maximum memory to be used for query workspaces.
xmlbinary | base64 | Sets how binary values are to be encoded in XML.
xmloption | content | Sets whether XML data in implicit parsing and serialization operations is to be considered as documents or content fragments.
zero_damaged_pages | off | Continues processing past damaged page headers.
(261 rows)

</pre>