How to Configure DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris,

How to Configure DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris, AIX,HP-UX) post install [ID 562509.1]
 修改时间 25-APR-2012     类型 HOWTO     状态 PUBLISHED 

In this Document

 Goal
 Fix
 How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) on 64bit Unix operating systems like Sparc Solaris, AIX, HP-UX RISC, HP-UX Itanium and Linux x86-64bit

Applies to:

Oracle Database Gateway for SQL Server – Version 11.1.0.6 to 12.0.0.0

HP-UX PA-RISC (64-bit)

IBM AIX on POWER Systems (64-bit)

Oracle Solaris on SPARC (64-bit)

HP-UX Itanium

Linux x86-64

Oracle Transparent Gateway for Microsoft SQL Server – Version: 11.1.0.6 to 12.0.0.0

Goal

Starting with 11g Oracle now provides a Database Gateway for MS SQL Server for 64bit Unix operating systems.

The gateway is certified with Oracle database release 10.1.0.5, 10.2.0.3 after applying the gateway compatibility patch bug <> or you can directly use it with Oracle RDBMS 10.2.0.4, 10.2.0.5, 11.1 and 11.2.

It might work with 9.2.0.8 after applying patch bug <> but there’s no guarantee as the 11.2 gateway was never officially certified with 9.2.0.8 Oracle database release.

 

Fix

How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) on 64bit Unix operating systems like Sparc Solaris, AIX, HP-UX RISC, HP-UX Itanium and Linux x86-64bit

SIDE NOTE: HP-UX RISC DG4MSQL is 32bit and instead of the LD_LIBRARY_PATH the SHLIB_PATH setting is requires.

The Oracle Database Gateway for MS SQL Server for Linux platforms comes on a separate CD. It can be installed into an existing 11g database Oracle_Home (please pay attention that if the Oracle_Home contains an already patched release of the database; then you MUST apply this patchset again. The reason for this is that the gateway installation might overwrite already patched libraries with the base version as delivered on the CD. To get a proper environment again an already applied patchset needs to be reapplied).

 
After the installation the following items must be configured:

1) listener (in the ORACLE_HOME where the gateway software is installed)

2) tnsnames (in the ORACLE_HOME where the Oracle database software is installed)

3) init<SID>.ora of the hs subsystem (in the ORACLE_HOME where the gateway software is installed)

4) Oracle database

1) The listener needs a new SID entry like the following:

    

(SID_NAME=dg4msql)

     (ORACLE_HOME=/home/oracle/oracle/product/11.1)

 (ENV=”LD_LIBRARY_PATH=/home/oracle/product/11.1/dg4msql/driver/lib:/home/oracle/product/11.1/lib”)

     (PROGRAM=dg4msql) 

     

 

Please correct the ORACLE_HOME entry and the ENV entry according to your installation.
We strongly recommend to add the LD_LIBARARY_PATH to the listener.ora file to avoid any conflicts with already existing ODBC driver managers.
The LD_LIBRARY_PATH must contain the full qualified path to the $ORACLE_HOME/lib and $ORACLE_HOME/dg4msql/driver/lib directory. Please do NOT use $ORACLE_HOME variable in the ENV path.

ATTENTION:
1. Installing on HP-UX RISC platform please set SHLIB_PATH instead of LD_LIBRARY_PATH as the gateway on HP-UX RISC is still 32bit and thus requires the SHLIB_PATH setting.

2. For AIX platforms please use LIBPATH instead of LD_LIBRARY_PATH.

So a listener.ora file with a listener listening on port 1511 might look like:

 

SID_LIST_LISTENER =

   (SID_LIST =

      (SID_DESC =

      (SID_NAME=dg4msql)

      (ORACLE_HOME=/home/oracle/oracle/product/11.1)

      (ENV=”LD_LIBRARY_PATH=/home/oracle/product/11.1/dg4msql/driver/lib:/home/oracle/product/11.1/lib”) 

      (PROGRAM=dg4msql)

      ) 

   )

LISTENER =

   (DESCRIPTION_LIST =

       (DESCRIPTION =

         (ADDRESS_LIST =

            (ADDRESS = (PROTOCOL = TCP)(HOST = <hostname of the Oracle Server>) (PORT = 1511))

         )

      )

    )

 

The listener must be stopped and started  after changing the listener.ora file!
2) The tnsnames.ora needs an entry for the DG4MSQL alias:

 

dg4msql.de.oracle.com =

    (DESCRIPTION=

        (ADDRESS=(PROTOCOL=tcp)(HOST=<hostname of the Oracle Server>)(PORT=1511))

        (CONNECT_DATA=(SID=dg4msql))

        (HS=OK)

     )

 

The domain of the tns alias can differ from the one used above (de.oracle.com),  depending on the parameter in the sqlnet.ora:
NAMES.DEFAULT_DOMAIN = de.oracle.com

But the important entry is the (HS=OK) key word. (HS=) is also a valid entry, but DBCA and NetCA will only recognize (HS=OK) entries and remove any (HS=) entries. 

After adding the tnsnames alias and restarting the listener, a
connectivity check is to use tnsping <alias>.

tnsping dg4msql

should come back with a successful message.

 

  3) init.ora of the gateway:

There are some restrictions how to name the SID (described in the Net Administrators Guide in detail).
At this place only a short note: don’t use dots in the SID and keep it short!

The SID is also relevant for the initialiastion file of the gateway. The name of the
file is init<SID>.ora. In this example it is called initdg4msql.ora.
The file is located at $ORACLE_HOME/dg4msql/admin.
It should contain at least the connect details:

 

HS_FDS_CONNECT_INFO=<SQL Server>:<port>//<database>

# alternate connect format is hostname/serverinstance/databasename

 

Short explanation of the parameter HS_FDS_CONNECT_INFO:
It can be configured to use a SQL Server port# or to work with instances:

HS_FDS_CONNECT_INFO=<SQL Server>:<port>//<database>

HS_FDS_CONNECT_INFO=<SQL Server>/<instance>/<database>

<SQL Server> is the hostname where the SQL Server resides
<port> is the port number of the SQL Server (default is 1433)
<instance> is the name of a dedicated instance you want to connect to; leave it blank if your SQL Server setup does not use SQL Server instances (when using a named instance, please make sure the “SQL Browser Service” is started on the Microsoft SQL Server machine)
<database> is the name of the database DG4MSQL should connect to; for example Northwind

 

Example:
To connect to a Northwind database on a SQL Server (w2k3) with IP Address 192.168.0.1 using the default instance you can use:

 

HS_FDS_CONNECT_INFO=x2kx.de.oracle.com:1433//Northwind

or

HS_FDS_CONNECT_INFO=192.168.0.1:1433//Northwind

To connect to a SQL Server 2k5 named instance msql2k5 on this machine listening on port 4025 either use:

HS_FDS_CONNECT_INFO=x2kx.de.oracle.com:4025//Northwind

or

HS_FDS_CONNECT_INFO=192.168.2.1:4025//Northwind

or

HS_FDS_CONNECT_INFO=x2kx.de.oracle.com/MSQL2k5/Northwind

or

HS_FDS_CONNECT_INFO=192.168.2.1/MSQL2k5/Northwind

 

SIDE NOTE:
When using HS_FDS_CONNECT_INFO=<SQL Server>/<instance>/<database> and connections of the gateway fail although using port and host connections are working, then make sure on te SQL Server machine the “SQL Server Browser” service which provides SQL Server connection information to client computers is started.
When connections using the named instance connect method continue to fail (even with the “SQL Browser Service” being started option of using the port number is a suitable workaround.
You can find the port number by accessing SQL Server’s Server Network Utility program, choosing the Instance you want to connect to, highlighting tcp/ip under Enabled Protocols, and clicking the Properties button. A window should open with the port number that the instance is listening on.

  4) Configuring the Oracle database

The only thing that must be done here is to create a database link:
connect with the username/password that has sufficient rights to create a
database link (i.e. system).
The syntax is:

 

create [public] database link <name>
connect to <UID> identified by <pwd> using '<tnsalias>';

 

In other words, to connect to the MS SQL Server configured in the last steps,
the syntax must be:

CREATE DATABASE LINK sqlserver
CONNECT TO "sa" IDENTIFIED BY "sa" USING 'dg4msql';

The db link name is sqlserver. Username and password must be in double quotes,
because the username and password are case sensitive in SQL Server. ‘dg4msql’ points to
the alias in the tnsnames.ora file that calls the HS subsystem.

If everything is configured well, a select of a SQL Server table should be successful:

select * from “systables”@sqlserver;

Side note: The systables table name at the MS SQL Server is in small letters. As the MS SQL Server is case sensitive this table name must be surrounded by double quotes.

    原文作者:SQL
    原文地址: https://blog.csdn.net/lixiaohuiok111/article/details/7836439
    本文转自网络文章,转载此文章仅为分享知识,如有侵权,请联系博主进行删除。
点赞