Can't get Kerberos realm

1. Can’t get Kerberos realm

原因分析

原始代码为:

org.apache.hadoop.security.UserGroupInformation.setConfiguration(conf) 
sun.security.krb5.Config.refresh()

  

首先根据传进来的Hadoop配置conf,去设置UserGroupInformation(UGI),方法的调用关系如下(删除了部分不相关代码):

public static void setConfiguration(Configuration conf) {
  initialize(conf, true);
}

initialize方法如下 

private static synchronized void initialize(Configuration conf, boolean overrideNameRules) {
  authenticationMethod = SecurityUtil.getAuthenticationMethod(conf);
  if (overrideNameRules || !HadoopKerberosName.hasRulesBeenSet()) {
    try {
      HadoopKerberosName.setConfiguration(conf);
    } catch (IOException ioe) {
      throw new RuntimeException(
          "Problem with Kerberos auth_to_local name configuration", ioe);
    }
  }
  ......
}

  

setConfiguration方法如下

public static void setConfiguration(Configuration conf) throws IOException {
  final String defaultRule;
  switch (SecurityUtil.getAuthenticationMethod(conf)) {
    case KERBEROS:
    case KERBEROS_SSL:
      try {
        KerberosUtil.getDefaultRealm();
      } catch (Exception ke) {
        throw new IllegalArgumentException("Can't get Kerberos realm", ke);
      }
      ......
  }
  ......
}

  

getDefaultRealm使用了反射,目的是为了兼容两套jdk,即IBM(com.ibm.security.krb5.internal.Config) 和 Oracle(sun.security.krb5.Config)

public static String getDefaultRealm() 
    throws ClassNotFoundException, NoSuchMethodException, 
    IllegalArgumentException, IllegalAccessException, 
    InvocationTargetException {
  Object kerbConf;
  Class<?> classRef;
  Method getInstanceMethod;
  Method getDefaultRealmMethod;
  if (System.getProperty("java.vendor").contains("IBM")) {
    classRef = Class.forName("com.ibm.security.krb5.internal.Config"); // 获取IBM jdk的类引用
  } else {
    classRef = Class.forName("sun.security.krb5.Config"); // 获取Oracle jdk的类引用
  }
  getInstanceMethod = classRef.getMethod("getInstance", new Class[0]);
  kerbConf = getInstanceMethod.invoke(classRef, new Object[0]);
  getDefaultRealmMethod = classRef.getDeclaredMethod("getDefaultRealm", new Class[0]);
  return (String)getDefaultRealmMethod.invoke(kerbConf, new Object[0]);
}

  

从上述代码来看,先获取Config类引用,然后getInstanceMethod是获得getInstance方法,再次getDefaultRealmMethod是获得getDefaultRealm方法。

因此,假设我们是使用的Oracle的JDK,那么最后是调用的sun.security.krb5.getDefaultRealm()。接下来看一下sun.security.krb5.getDefaultRealm()是如何实现的。

public String getDefaultRealm() throws KrbException {
  if(this.defaultRealm != null) { // 如果defaultRealm不为空,直接返回defaultRealm
    return this.defaultRealm;
  } else { // 如果defaultRealm为null,获取defaultRealm
    KrbException var1 = null;
    String var2 = this.getDefault("default_realm", "libdefaults");
    if(var2 == null && this.useDNS_Realm()) {
      try {
        var2 = this.getRealmFromDNS();
      } catch (KrbException var4) {
        var1 = var4;
      }
    }
    ......
  }
} 

我们假设defaultRealm = null,看一下如何从var2 = this.getRealmFromDNS();来获取defaultRealm

private String getRealmFromDNS() throws KrbException {
  String var1 = null;
  String var2 = null;

  try {
    var2 = InetAddress.getLocalHost().getCanonicalHostName(); // 1. 获取local host name
  } catch (UnknownHostException var7) {
    KrbException var4 = new KrbException(60, "Unable to locate Kerberos realm: " + var7.getMessage());
    var4.initCause(var7);
    throw var4;
  }

  String var3 = PrincipalName.mapHostToRealm(var2); // 2. 根据local host name获取realm
  ....
} 

mapHostToRealm()方法如下:

static String mapHostToRealm(String var0) {
  String var1 = null;

  try {
    String var2 = null;
    Config var3 = Config.getInstance(); // 获取Config的单例对象
    if((var1 = var3.getDefault(var0, "domain_realm")) != null) {
      return var1;
    }
    .......
  } catch (KrbException var5) {
    ;
  }
  return var1;
}

  

这里会获取Config的单例对象,

public static synchronized Config getInstance() throws KrbException {
  if(singleton == null) {
    singleton = new Config();
  }

  return singleton;
}

 

再看Config.getInstance();的具体动作就是判断单例对象是否为null,不为null直接返回,为null重新new一个Config对象。

同时,Config类中还有一个方法refresh,其代码如下:

public static synchronized void refresh() throws KrbException {
  singleton = new Config();
  KdcComm.initStatic();
}

  

从refresh的代码看,只要调用refresh()方法,就会重新生成Config的单例对象。这个refresh()方法,也是我们代码里面要调用的。

再回顾一下我们的原始代码:

org.apache.hadoop.security.UserGroupInformation.setConfiguration(conf) 
sun.security.krb5.Config.refresh()

回到getInstance()方法,假设singleton单例是null,会生成Config的单例对象。以后,再次调用getInstance方法都会直接返回这个单例对象了,没有再new的机会了。有人开始质疑没有机会new Config()对象了? 调用Config.refresh()方法不是可以new吗? 答案是可以new,但是如果我们的UserGroupInformation.setConfiguration(conf)会抛出异常,是不是Config.refresh()方法就不会被调用了! 我们的错误就是出现在这里,后面分析UserGroupInformation.setConfiguration(conf)怎么抛出异常了。

 

在我们来看一下new Config()具体做了什么事情。

private Config() throws KrbException {
  String var1 = getProperty("java.security.krb5.kdc"); // 从系统变量获取kdc地址,假设我们启动JVM时没有设置该变量
  if(var1 != null) {
    this.defaultKDC = var1.replace(':', ' ');
  } else {
    this.defaultKDC = null;
  }

  this.defaultRealm = getProperty("java.security.krb5.realm"); // 从系统变量获取realm,假设我们启动JVM时也没有设置该变量
  if((this.defaultKDC != null || this.defaultRealm == null) && (this.defaultRealm != null || this.defaultKDC == null)) {
    try {
      String var3 = this.getJavaFileName(); // 该方法会从JVM参数java.security.krb5.conf以及<java-home>/lib/security/krb5.conf获取到krb5.conf文件
      Vector var2;
      if(var3 != null) {
        var2 = this.loadConfigFile(var3);
        this.stanzaTable = this.parseStanzaTable(var2);
        if(DEBUG) {
          System.out.println("Loaded from Java config");
        }
      } else { // 假设JVM参数java.security.krb5.conf以及<java-home>/lib/security/krb5.conf都没有获取到krb5.conf文件
        boolean var4 = false;
        if(isMacosLionOrBetter()) {
          try {
            this.stanzaTable = SCDynamicStoreConfig.getConfig();
            if(DEBUG) {
              System.out.println("Loaded from SCDynamicStoreConfig");
            }

            var4 = true;
          } catch (IOException var6) {
            ;
          }
        }

        if(!var4) {
          var3 = this.getNativeFileName(); // 我们是centos机器, 会拿到/etc/krb5.conf
          var2 = this.loadConfigFile(var3); // 加载/etc/krb5.conf文件
          this.stanzaTable = this.parseStanzaTable(var2);
          if(DEBUG) {
            System.out.println("Loaded from native config");
          }
        }
      }
    } catch (IOException var7) {
      ;
    }

  } else {
    throw new KrbException("System property java.security.krb5.kdc and java.security.krb5.realm both must be set or neither must be set.");
  }
}

  

我们的问题就出在var2 = this.loadConfigFile(var3); 位置,因为加载/etc/krb5.conf文件的时候,恰好/etc/krb5.conf文件不存在,因为我们会把修改的krb5.conf去替换/etc/krb5.conf文件,在替换的时间内,恰好去loadConfigFile(),该方法就报了FileNotFoundException的异常。这个异常一直throw到UserGroupInformation.setConfiguration(conf)调用的地方,导致我们永远调用不到Config.refresh()方法。

 

 

2. 报错com.google.common.util.concurrent.UncheckedTimeoutException: java.util.concurrent.TimeoutException

原因分析:首先这个异常是因为调试上述报错产生的,所以顺便分析下原因。

上述报错是Can’t get Kerberos realm,网上查一下,大概是因为拿不到kdc和realm。

因此,我在JVM启动参数中添加了如下3个参数:

       -Djava.security.krb5.conf=/etc/krb5.conf \
       -Djava.security.krb5.kdc=node1:8080 \
       -Djava.security.krb5.realm=KFC.com \

指定了krb5.conf文件,kdc地址,realm值。然后重启程序,发现可以正常使用,然后把/etc/krb5.conf文件删除了(上个错误其实猜想到了是因为读不到krb5.conf造成的)。

程序竟然报错 java.util.concurrent.TimeoutException,打jstack

TimeoutException 的jstack如下:
"builtin-checker-serviceId-58" prio=10 tid=0x00007f678800e800 nid=0x4084 waiting for monitor entry [0x00007f672fffe000]
   java.lang.Thread.State: BLOCKED (on object monitor)
        at org.apache.hadoop.security.UserGroupInformation.loginUserFromKeytabAndReturnUGI(UserGroupInformation.java:1074)
        - waiting to lock <0x00000000a8b940d0> (a java.lang.Class for org.apache.hadoop.security.UserGroupInformation)
        ......        
        at java.util.concurrent.FutureTask.run(FutureTask.java:262)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:745)


调用UserGroupInformation.loginUserFromKeytabAndReturnUGI被block了

往上找jstack,
"builtin-checker-serviceId-59" prio=10 tid=0x00007f67680b3800 nid=0x4097 runnable [0x00007f672f2ee000]
   java.lang.Thread.State: RUNNABLE
        at java.net.PlainDatagramSocketImpl.receive0(Native Method)
        - locked <0x000000009a0076e0> (a java.net.PlainDatagramSocketImpl)
        at java.net.AbstractPlainDatagramSocketImpl.receive(AbstractPlainDatagramSocketImpl.java:146)
        - locked <0x000000009a0076e0> (a java.net.PlainDatagramSocketImpl)
        at java.net.DatagramSocket.receive(DatagramSocket.java:816)
        - locked <0x000000009a017848> (a java.net.DatagramPacket)
        - locked <0x000000009a0076a0> (a java.net.DatagramSocket)
        at sun.security.krb5.internal.UDPClient.receive(NetClient.java:207)  // 卡主了
        at sun.security.krb5.KdcComm$KdcCommunication.run(KdcComm.java:390)
        at sun.security.krb5.KdcComm$KdcCommunication.run(KdcComm.java:343)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.security.krb5.KdcComm.send(KdcComm.java:327)
        at sun.security.krb5.KdcComm.send(KdcComm.java:219)
        at sun.security.krb5.KdcComm.send(KdcComm.java:191)
        at sun.security.krb5.KrbAsReqBuilder.send(KrbAsReqBuilder.java:319)
        at sun.security.krb5.KrbAsReqBuilder.action(KrbAsReqBuilder.java:364)
        at com.sun.security.auth.module.Krb5LoginModule.attemptAuthentication(Krb5LoginModule.java:735)
        at com.sun.security.auth.module.Krb5LoginModule.login(Krb5LoginModule.java:584)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at javax.security.auth.login.LoginContext.invoke(LoginContext.java:762)
        at javax.security.auth.login.LoginContext.access$000(LoginContext.java:203)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:690)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:688)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:687)
        at javax.security.auth.login.LoginContext.login(LoginContext.java:595)
        at org.apache.hadoop.security.UserGroupInformation.loginUserFromKeytabAndReturnUGI(UserGroupInformation.java:1092)
        - locked <0x00000000a8b940d0> (a java.lang.Class for org.apache.hadoop.security.UserGroupInformation)
        ........
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:745)

  

从jstack中看到UDPClient.receive卡主了,为什么卡主了,不知道! 问大神,大神说加入JVM调试参数-Dsun.security.krb5.debug=true,可以打印日志到console中。在console中看到如下日志:

Ordering keys wrt default_tkt_enctypes list
default etypes for default_tkt_enctypes: 3 1 16.
default etypes for default_tkt_enctypes: 3 1 16.
>>> KrbAsReq creating message
>>> KrbKdcReq send: kdc=node1    UDP:88, timeout=30000, number of retries =3, #bytes=134
>>> KDCCommunication: kdc=node1   UDP:88, timeout=30000,Attempt =1, #bytes=134
SocketTimeOutException with attempt: 1
>>> KDCCommunication: kdc=node1   UDP:88, timeout=30000,Attempt =2, #bytes=134
SocketTimeOutException with attempt: 2
>>> KDCCommunication: kdc=node1   UDP:88, timeout=30000,Attempt =3, #bytes=134
SocketTimeOutException with attempt: 3
>>> KrbKdcReq send: error trying node1  
java.net.SocketTimeoutException: Receive timed out
        at java.net.PlainDatagramSocketImpl.receive0(Native Method)
        at java.net.AbstractPlainDatagramSocketImpl.receive(AbstractPlainDatagramSocketImpl.java:146)
        at java.net.DatagramSocket.receive(DatagramSocket.java:816)
        at sun.security.krb5.internal.UDPClient.receive(NetClient.java:207)
        at sun.security.krb5.KdcComm$KdcCommunication.run(KdcComm.java:390)
        at sun.security.krb5.KdcComm$KdcCommunication.run(KdcComm.java:343)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.security.krb5.KdcComm.send(KdcComm.java:327)
        at sun.security.krb5.KdcComm.send(KdcComm.java:219)
        at sun.security.krb5.KdcComm.send(KdcComm.java:191)
        at sun.security.krb5.KrbAsReqBuilder.send(KrbAsReqBuilder.java:319)
        at sun.security.krb5.KrbAsReqBuilder.action(KrbAsReqBuilder.java:364)
        at com.sun.security.auth.module.Krb5LoginModule.attemptAuthentication(Krb5LoginModule.java:735)
        at com.sun.security.auth.module.Krb5LoginModule.login(Krb5LoginModule.java:584)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:606)
        at javax.security.auth.login.LoginContext.invoke(LoginContext.java:762)
        at javax.security.auth.login.LoginContext.access$000(LoginContext.java:203)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:690)
        at javax.security.auth.login.LoginContext$4.run(LoginContext.java:688)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:687)
        at javax.security.auth.login.LoginContext.login(LoginContext.java:595)
        at org.apache.hadoop.security.UserGroupInformation.loginUserFromKeytabAndReturnUGI(UserGroupInformation.java:1092)
        ........

看到默认去连了KDC的88端口,默认端口被改成了1088,所以连接失败,导致超时。 听说没有参数可以设置KDC的端口, 不知道真假,在-Djava.security.krb5.kdc参数中指定kdc端口无效。

 

 

参考: https://docs.oracle.com/javase/7/docs/technotes/guides/security/jgss/tutorials/KerberosReq.html 及源代码

    原文作者:Entropy_lxl
    原文地址: https://www.cnblogs.com/lixiaolun/p/8317146.html
    本文转自网络文章,转载此文章仅为分享知识,如有侵权,请联系博主进行删除。
点赞